Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Whilst many of the best standing desk brands out there often with several models for different sizes and weight capacities etc. Vernal aims to make the customers life simpler by introducing one frame to do it all at a price of £430 (at time of writing).
With a rated load of 120kg, it should be more than enough to lift anything a regular work from home environment can throw at it.
Vernal Standing Desk: Unboxing
The desk came as expected in two parts, one large heavy box for the frame and very flat for the desk top.
The frame was well boxed with all parts separated by protective foam, cardboard and plastic. All the assembling accessories were packaged neatly in one box. The screws, tool etc were in a bandolier of plastic, each section marked in size and part number.
All sections of the desk had nice, large and more importantly low tack sticker labels identifying each part. This allowed easy identification of parts and removal of the labels post assembly without leaving that horrible sticky residue.
The desk top was equally well packaged with large rubber like corner protectors. We opted to go with the 120cm x 60cm walnut laminate desk top, the smallest size on offer from Vernal.
You also get a nice, premium feeling beech wood coaster.
Vernal Standing Desk: Assembly
Assembly of the desk was equally easy. Vernal provided all the tools necessary, namely an M6 Allen Wrench and Phillips Head Screwdriver, so if you have absolutely no tools, you can still put this desk together. We had power tools at out disposal making assembly significantly quicker.
The manual was incredibly clear and easy to follow being like a large book. We start by putting together both the legs, side and mounting brackets together then the desktop. Vernal’s desk tops already have pre threaded metal inserts showing where the mounting brackets are to be screwed in.
This easily done by mounting one set of legs to one side, then sliding the cross bars in before finally sliding the opposite side legs on and screwing it all down. Vernal has also provided the screws as well for non-Vernal desktops along with separate instructions on how to do this.
I chose to put the control panel on the left side and this is where I noted the first issue. The screws appeared to be short, they are only 15mm long. The control panel bracket is quite thick, I measuring the screw against it, I saw that only the tip, about 5mm of it, would bite into the desk.
As expected, on my first try, the screw tore desktop veneer and failed to grip, same thing with the second screw. With no other provided screws, I had to go and rummage in my tool box to get some longer screws.
Once the control panel fiasco was done, it was matter of attaching the control box, connecting all the cables, tidying the underside up before covering it with the decorative cable cover for a neat install and lastly the cable tray hooks.
The feet are last to go one, before the inaugural flip, they can be positioned center or offset back, the choice/preference is yours. I opted to have it central as I am sure that is how most end users would want it. The desk is then flipped the right way up, to add the finishing touches, two hooks and decorative plates, one on each side.
The last part had me a little concerned, most brands supply all metal parts pre molded or bent to shape. However Vernal has chosen to allow the end user to bend the cable tray themselves along a perforated line.
Whilst I found this easy to do, it did crack the paint on the sheet of metal. I’m not sure how confident others would be doing this for fear of breaking or damaging this part. Hooking on the cable tray is the last part of the assembly save for putting the desk where it needs to go.
Vernal Standing Desk: In use
Over the past few weeks, the desk was put to the test by me and wife who works exclusively form home. The Vernal standing desk was big upgrade from her smaller Ikea desk, just in terms of real estate.
Vernal claims that this desk should be able to lift 120kgs easily with max load of 160kgs. Sitting all my 100kgs on it I found the desk seem to be slow to raise, and it had to stop a few times under the load of me. However, I did not hold this against the desk as carrying 100kgs is unusual for what is an office desk.
Putting the usual office equipment on it, the Vernal desk had no problem lifting and lowering the load smoothly and quietly.
The control panel is simple in form yet provides all the needed functions for going up, down and three memory functions. I like that the buttons had to be pushed physically into actuate them as some other tested desk will activate simply by you brushing against the control panel. The panel can be switched between metric and imperial measurements and other settings based on button presses.
The hooks on either side are a nice feature allowing you to hang handphones or other peripherals off the desk rather than crowding it. Each side of the desk has a Vernal magnetic vanity plate on the legs, ostensibly to hide two screw heads. This is a subjective matter but I would have preferred a more subdued such as black engraved rather than the Silver.
I was initially skeptical about the size of the cable tray as it was so large, however this has proved to be a boon for ease of access from all angles of the desk.
What I wasn’t a fan of were the feet of the desk. The feet, whilst planted firmly on the ground has a “decorative” plate on top that extends beyond the actual feet, this plate is thin and more crucially at toe stubbing level as I found to my detriment.
Vernal Standing Desk: Final verdict
Overall, the Vernal Standing Desk is a great desk, for the price and simplicity of only having one model puts them ahead. The assembly, large cable tidy tray, head phone hooks and easy to use control panel make this a breeze to own and use.
However, it is sorely let down by the fact that the screws for the control panel are not adequately long enough, some bending is required by the end user and the most egregiously, the toe stubbing feet of the desk.
Add Comment